DS Liquid Logo

Flux for Non-ferrous Metals

1. Flux for General Purpose

CategoryPurpose of UseProduct NameNaFormTemp(℃)
Dross separation (Exothermic reaction)
  • This product effectively separates and recovers metal Al from dross.
  • Each product is specifically designed and customized for the clients.
A-111Na-basedPowder700~750
C-111650~720
WDR(#1)680~750
WDR(#2)650~720
K-104DL710 or above
Exothermic agent
  • Effectively separates and recovers metal Al from dross.
K-104YGNa-basedPowder710 or above
K-104DM710 or above
Inclusions remover
  • This product removes oxides from molten metals.
  • It can increase the recovery ratio and improve the Al ingot surface.
A-800MNa-basedPowder710 or above
H₂ gas remover
  • This product removes H₂ gas in molten metals.
  • This product can prevent pin holes/porosities from forming in the final product.
DGF-200YGNa-basedPowder700 or above
DGF-200H700 or above
DGF-500N700 or above

2. Non-toxic Flux for General Purposes

CategoryPurpose of UseProduct NameNaFormTemp(℃)
Dross separator
  • This product effectively separates and recovers metal Al from dross.
  • Each product is specifically designed and customized for the clients.
A-111(#2)Na-basedPowder710 or above
C-111(#1,2)670 or above
WDR(#3,4)680 or above
K-104DL(#2)720 or above
Exothermic agent
  • Effectively separates and recovers metal Al from dross.
K-104YG(#1,2)Na-basedPowder-
K-104YG(S)-
K-104YG(W)-
Anti-oxidizing agent
  • Prevents oxidation on the molten surface.
  • Improves recovery efficiency.
RC-100Na-basedPowder710 or above
Inclusions remover
  • This product removes oxides from molten metals.
  • It can increase the recovery ratio and improve the Al ingot surface.
A-800M(#1,2)Na-basedPowder710 or above
A-800M(#8)-
H₂ gas remover
  • This product removes H₂ gas in molten metals.
  • Prevents pinholes and porosity formation.
A-100NFNon-Na-basedPowder710 or above
A-100SK(#2)Na-basedPowder710 or above
DGF-100SKNa-basedPowder680 or above
DGF-200YGNa-basedPowder710 or above
DGF-300LM
DGF-400PJ		Na-basedPowder710 or above
ENF-50N-2Na-basedPowder710 or above
AS-10Na-basedTablet710 or above
D-109Na-basedTablet680~730

3. Flux for Special Purposes

CategoryPurpose of UseProduct NameNaFormTemp(℃)
Mg reducer
  • This product reduces Mg contents.
  • It is possible to accurately calculate the reducing ratio of Mg.
  • Reducing magnesium is possible regardless of the level of Mg content.
MRF-100DNNa-basedPowder730+
MRF-70HYNa-basedPowder700+
Mg reducer(#3)Na-basedPowder730+
MRF-300HNa-basedPowder730+
Alkaline metal reducer (Ca, Na)
  • This product reduces calcium or sodium.
  • It is possible to accurately calculate the reducing ratio of Ca(Na).
  • An additional effect is that impurities and inclusions are removed from the molten metal.
CRF-100Non-Na-basedPowder730+
CRF-100FNon-Na-basedPowder730+
URF-100TYNa-basedPowder700+
ARF-200Non-Na-basedPowder730+
Improving aluminum structureRefining of crystal grains (α crystal)
  • This product prevents the grouping of α crystal during solidification.
NK-113-2Non-Na-basedTablet690~740

Refining of Si grains
(eutectic or hypo-eutectic)

  • This product refines the deposited Si with Na.
NS-111Na-basedPowder690~750
NS-222720~750
NS(#7)800+

Refining of primary Si
(hyper-eutectic)

  • This product prevents the grouping of Si in hyper-eutectic alloys with high Si content.
FP-113-PNon-Na-basedPowder760~800
FP-113-TTablet

4. Flux for Other Non-Ferrous Metals

CategoryPurposeProduct NameNaFormTemp(℃)
Cu (Copper)Removing oxides
  • This product removes oxides and recovers molten metal from the dross, which increases product quality and recovery ratio.
B-100(#1,2)Na-basedPowder1,200+
Removing gas
  • This product removes O₂ gas from molten Cu.
BP-BLOCKNa-basedTablet1,200+
Lubricant for continuous casting
  • This product prevents combustion between the mould and molten copper, and makes casting easier. (Low viscosity and melting point)
CC-20D(#1)Non-Na-basedPowder1,200+
Zn (Zinc)
  • This product removes oxides and recovers molten metal from the dross, which increases product quality and recovery ratio.
Z-21-38Na-basedPowder420~450

Flux production process

STEP 1
Raw materials
STEP 1
STEP 2
Quality Control
STEP 2
STEP 3
Mixing Process
STEP 3
STEP 4
Quality Control
STEP 4
STEP 5
Packing
STEP 5

Testing Facilities for Quality Asssuarance

Raw material
flux1flux2flux3flux4
Aluminum Molten
flux6flux7